Одновременная регистрация в трех деревьях???

Обсуждение технических вопросов по продуктам Novell

Одновременная регистрация в трех деревьях???

Сообщение Konstantyn » 10 мар 2004, 12:32

В одной сети три дерева! В каждом дереве по одному серверу. При заргузке регистрируюсь на одном сервере, а остальные мапятся в скрипте (attach serv2 и т.д.) В результате получаю регистрацию NDS на одном сервере, а на других двух Bindery. Как можно сделать (и можно ли?!), чтобы поисходила NDS регистрация всех трех серверов? Это необходимо для их администрирования.
P.S. Структура "древовидной" сети придумана прошлым админом, и пока объединение всех в одно дерево невозможно...
Konstantyn
 
Сообщения: 48
Зарегистрирован: 22 янв 2004, 13:12
Откуда: Челябинск

Re: Одновременная регистрация в трех деревьях???

Сообщение Владимир Горяев » 10 мар 2004, 12:45

Konstantyn писал(а):В одной сети три дерева! В каждом дереве по одному серверу. При заргузке регистрируюсь на одном сервере, а остальные мапятся в скрипте (attach serv2 и т.д.) В результате получаю регистрацию NDS на одном сервере, а на других двух Bindery. Как можно сделать (и можно ли?!), чтобы поисходила NDS регистрация всех трех серверов? Это необходимо для их администрирования.
P.S. Структура "древовидной" сети придумана прошлым админом, и пока объединение всех в одно дерево невозможно...
The TREE command can be used only with clients that support multiple NDS* tree attachments.
Use TREE to attach to another NDS tree within your network and to access its resources.
The TREE command changes the "focus" of your login script so that all NDS object references in subsequent script commands (for drive mappings, print captures, etc.) apply to the NDS tree specified in the TREE command.
You can include multiple TREE commands within a login script, either to attach to additional trees or to switch the login script’s "focus" back to a tree that the user is already attached to.

Command Format

TREE tree_name[/complete_name[;password]]

Using Tree

Replace tree_name with the name of the NDS tree that you want the user to attach to.
Replace complete_name with the user's complete name (Distinguished Name) for the NDS tree that the user is attaching to. The complete name establishes your context in the tree. If you do not include the complete name, the user is prompted for a complete name when the TREE command is executed from the login script.
Replace password with the correct password for that user and tree. If the username and password are the same as the primary login username and password, you can omit the password and not be prompted for it.

Important: Use caution when including passwords in a login script. It is more secure to eliminate the password. Then, at the point in the login script where the TREE command is executed, the user is prompted for the password.

Example

To attach the user with the complete name MRICHARD.ACME (whose password is BUTTERFLY) to an NDS tree named CORP, add the following line to her login script:
tree corp/.mrichard.acme;butterfly
Бардак автоматизировать невозможно!!!
_________________
Аватара пользователя
Владимир Горяев
 
Сообщения: 3473
Зарегистрирован: 05 июн 2002, 13:37
Откуда: Смоленск

Сообщение Konstantyn » 10 мар 2004, 13:54

ИСЧЕРПЫВАЮЩЕ!!!
Спасибо!
Konstantyn
 
Сообщения: 48
Зарегистрирован: 22 янв 2004, 13:12
Откуда: Челябинск

Благодарю Всех самых добрых админов!

Сообщение harry_iv » 16 мар 2004, 19:33

я тоже не знал. каждый раз логинился по отдельности
Заранее благодарен за помощь
-------------------------------------
CNA 6 Certified
Аватара пользователя
harry_iv
 
Сообщения: 47
Зарегистрирован: 25 сен 2003, 19:05
Откуда: Москва


Вернуться в Novell

Кто сейчас на конференции

Сейчас этот форум просматривают: Google [Bot] и гости: 55

cron