Далее
- Код: Выделить всё
load rs232 n
Loading module RS232.NLM
NetWare Remote Console RS232 Driver
Version 4.12 7 February 2000
Copyright 1994-98 Novell,Inc. All rights reserved.
Available COM ports:
Please choose a COM port
COM Port: 2
Please enter the baud rate (2400 - 115200)
Baud Rate: 9600
RS232-4.10-43: The NLM could not initialize and attach a driver to REMOTE.NLM.
The error was -1.
SERVER-5.00-1553: Module initialization failed.
Module RS232.NLM NOT loaded
Module initialization failed
на новеле вот что нашел
загрузка REMOTE NLM раньше не помагаетRS232-X-43: The NLM could not initialize and attach a driver to REMOTE.NLM. The error was code.
Source:rs232.nlm
Possible Cause: The REMOTE NLM is not loaded.
Action:Make sure the REMOTE NLM is loaded before loading this NLM.For information about a specific error code, search the Error Code information. If the problem persists, contact a Novell support provider.

Раньше как-то получалось, на стенде работало. Сейчас стенд накрылся... Ни у кого такого не было?
И вообче неохота ету железку к себе тащить.