В сети три сервера NetWare 6.0sp5 (включены в одно дерево,3 реплики,1-ая master и две вторые secondary) c установленной поддержкой ip и ipx протоколов. Ранее был только ipx,а сейчас перешли только на ip выключив ipx в inetcfg полностью везде поставив ipx в disable.
При проверке dsrepair возникает вот такая ошибка:
Checking server: .FS-NW6.agros
Found a Network Address Property on the server object and through SLP:
Address Type = TCP, data[6] = 192.168.*.*:524
Found a Network Address Property on the server object and through SLP:
Address Type = UDP, data[6] = 192.168.*.*:524
ERROR: Adding a Network Address Property :
Address Type = TCP, data[6] = 192.168.*.*:524
Address Type = UDP, data[6] = 192.168.*.*:524
Address Type = IPX, data[12] = 0BD0930A0000000000010451
Checking server address in Replica ID: 1, .[Root].
Читаю тид по этому поводу
http://support.novell.com/cgi-bin/searc ... 063799.htm
Где где рекомендуется выполнить для NW5.1 :
Set NCP enable IPX address = off
This will basically disable or remove the internal IPX network number. The internal IPX network number is also your server ID. Another way to stop referencing the internal IPX network number is to REM it out the server ID from the AUTOEXEC.NCF and reboot the server.
В NW6,я не нашел этого set параметра, а в AUTOEXEC.NCF все, что касается ipx и так отключено.
Подскажите, кто с сталкивался с этой проблемой, что нужно сделать для того чтобы её убрать.