Ну правой кнопкой по объекту, напр по контейнеру|Details... , далее д.б. закладка Remote Access. Жмешь F1 и наслаждаешься хелпом
Адрес там один.
Владимир Горяев писал(а):Ну правой кнопкой по объекту, напр по контейнеру|Details... , далее д.б. закладка Remote Access. Жмешь F1 и наслаждаешься хелпом
Адрес там один.
There is no way to hand out DHCP information through PPPRNS. PPPRNS can hand out the IP address but the DNS information need to be configured on the workstation separately.
Струин Олег писал(а):В тиде http://support.novell.com/cgi-bin/search/searchtid.cgi?/10053415.htm сказано:There is no way to hand out DHCP information through PPPRNS. PPPRNS can hand out the IP address but the DNS information need to be configured on the workstation separately.
В общем PPPRNS раздает только IP адреса, а DNS информацию надо заносить руками...
А в действительности все не так как на самом делеSetting Up PPPRNS for IP Support
This section is optional. You can set up your remote access server to function as a DHCP server for remote clients. When your remote access server is configured as a DHCP server, specify the following parameters per user or container:
Domain Name Server Address
Domain Name
Boot Filename (used for diskless clients)
For these parameters to apply, you must load DHCPD (for NetWare 4.11 systems) or DHCP (for NetWare 5 systems).
Сейчас этот форум просматривают: Иван Левшин aka Ivan L. и гости: 197