Страница 1 из 1

единое окно авторизации Novell OES и Zenworks

СообщениеДобавлено: 12 апр 2011, 13:30
Kuhnya
Доброе время суток всем. Вопрос, собственно заключается в том - возможно ли? и каким способом?
также есть проблема при логине в зен. проблема в том, что он просто не хочет коннектиться. выдает вот такое окно тырк. Захожу под админом...

Re: единое окно авторизации Novell OES и Zenworks

СообщениеДобавлено: 12 апр 2011, 15:02
Андрей Тр. aka RH
Так если в Зене создан user source, привязанный к вашему дереву, то авторизации через новелльного клиента должно хватать.

Re: единое окно авторизации Novell OES и Zenworks

СообщениеДобавлено: 13 апр 2011, 10:09
Kuhnya
но окно-то все равно выскакивает... вот и не знаю как избавиться от него... говорят можно что-то помудрить в профилях пользователей, но я пока точно не знаю.

Re: единое окно авторизации Novell OES и Zenworks

СообщениеДобавлено: 13 апр 2011, 11:07
Антон Фридрих
Читайте про политики DLU

Re: единое окно авторизации Novell OES и Zenworks

СообщениеДобавлено: 13 апр 2011, 11:12
Иван Иванов
Гляньте http://www.novell.com/documentation/zcm ... kinfo.html
начиная (2.1 тоже важно) с 2.2 Dynamic Local User Policy

The Dynamic Local User policy lets you create new users and manage existing users on the managed device after they have successfully authenticated to user source.

и дальше. При правильной настройке user source и политик пользователь должен создаваться на десктопе автоматом с членством в заданных локальных группах.
ну или можете вообще отключить авторизацию зена если использовать не будете:
31.4 Disabling ZENworks User Authentication

By default, if a user source is defined in the ZENworks Management Zone, the ZENworks Adaptive Agent attempts to authenticate a user to the zone whenever he or she logs in through the Microsoft or Novell client.

If necessary, you can disable user authentication to the zone. For example, you might have some users that only receive device-assigned content, so you don’t want the overhead of having them logged in to the zone.

To disable user authentication to the zone:

1.

Locate the following key in the registry on the user’s device:

HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn
2.

(Conditional) If you want to disable login, add the following DWORD value:

Value name: DisablePassiveModeLogin

Value data: Any non-zero value (for example, 1, 2, 3, 100)

With login disabled, no attempt is made to authenticate to the Management Zone when the user logs in through the Microsoft or Novell client.
3.

(Conditional) If you want to disable the ZENworks login prompt that appears if login through the Microsoft client or Novell client fails, add the following DWORD value:

Value name: DisablePassiveModeLoginPrompt

Value data: Any non-zero value (for example, 1, 2, 3, 100)

Normally, the Adaptive Agent attempts to authenticate the user to the zone by using the credentials entered in the Microsoft or Novell client. If login fails, the ZENworks login prompt is displayed in order to give the user an opportunity to authenticate with different credentials. This value setting disables the ZENworks login prompt.


Re: единое окно авторизации Novell OES и Zenworks

СообщениеДобавлено: 13 апр 2011, 11:23
Юрий Беляков
Kuhnya писал(а):но окно-то все равно выскакивает... вот и не знаю как избавиться от него... говорят можно что-то помудрить в профилях пользователей, но я пока точно не знаю.


Судя по окну ошибки, у вас не работает аутентификация в ZCM.

Скиньте, как настроена в ZCM аутентификация и версии ZCM.