После установки клиента 490sp2 overlay стал появлятся BSOD.

Добавлено:
15 дек 2005, 14:38
IlyaK
Привет всем!
Столкнулись со следующей проблемой:
После установки на клиентскую машину клиента 490sp2 overlay стал периодически появлятся синий экран смерти. Конфигурация клиентской машины: WinXP sp2, P4-3000, 2Гб памяти.
Сервер NW5.1 (sp7). Глюк уверенно проявляется при смене IP адреса машины. Установка клиента без поддержки IPX (только IP) не помогла.
Всем заранее спасибо за ответы..

Добавлено:
19 дек 2005, 23:25
IlyaK
Ну, вообщем сам написал, сам ответил:
Стал читать TID-ы и набрел на следующую инфу: TID-10092007:
---cut-----
Blue Screen of death when shutting down Novell Client
(Last modified: 08Jun2004)
Blue Screen of death when shutting down Novell Client
BSOD when shutting down
fact
Novell Client 4.9
Novell Client 4.9 Support Pack 1
Microsoft Windows 2000
Microsoft Windows XP Professional
Panda Antivirus for Enterprise
Symantec 9.0
symptom
Error: "STOP 0x0000000005 IRQ not less or equal to"
Error occurs when shutting down the workstation. You get this blue screen of death error at the point you should be getting the "It's ok to shut down your computer" message
note
A way to test is to remove the antivirus, removing antivirus results in the error going away
fix
This is an unconfirmed report from a customer. This customer reported that another workaround is to turn off the 'UNC PATH FILTER" under the Advanced Settings tab of the client properties.
document
Document Title: Blue Screen of death when shutting down Novell Client
Document ID: 10092007
Solution ID: NOVL96109
Creation Date: 11Mar2004
Modified Date: 08Jun2004
Novell Product Class: Netware Client
---cut-----
Вообщем, отключил этот UNC и проблема перестала беспокоить.. Кстати Symantec 9.0 отключать не пришлось..