ПО для чата, которое может работать на NW сервере. Бывает?

Обсуждение технических вопросов по продуктам Novell

Сообщение Аркадий Глазырин » 21 апр 2004, 21:02

FS1:sys:\novell\nm\aa\nmaa.nlm
Loading module NMAA.NLM
Novell Messenger Archive Agent
Version 1.01 15 July 2003
(C) Copyright 1996-2003 Novell Inc. All rights reserved.

NMAA: Agent configuration failure [0xB006]
NMAA:
NMAA: Cause: Default user DN or password not specified

NMAA: Cleaning up...

NMAA: Unloading...
Аватара пользователя
Аркадий Глазырин
 
Сообщения: 2762
Зарегистрирован: 16 авг 2002, 09:09
Откуда: Екатеринбург

Сообщение Аркадий Глазырин » 21 апр 2004, 21:23

Видимо дело в настройках. Вечная проблема Novell. Даже если и ставится легко и выглядит как приложение для Windows и работает под Windows, но для настройки его надо ящик пива выпить.

Насколько понял надо настривать через конфигурирование

strtup.aa


Однако их ДВА.
Один в каталоге aa, другой в ma.
Документация, если честно не очень понятная. На русском только Юридическая информация.
Есть ли где-нибудь русифицированная дока?
Аватара пользователя
Аркадий Глазырин
 
Сообщения: 2762
Зарегистрирован: 16 авг 2002, 09:09
Откуда: Екатеринбург

Сообщение PavelKHTW » 21 апр 2004, 21:53

Аркадий Глазырин писал(а):Видимо дело в настройках. Вечная проблема Novell. Даже если и ставится легко и выглядит как приложение для Windows и работает под Windows, но для настройки его надо ящик пива выпить.
Насколько понял надо настривать через конфигурирование

Зря ты так на Messenger, когда я его ставил на тестовый сервер он проинсталлировался и запустился сразу, без ковыряния каких либо настроек(сервер NW51sp6), правда было одно но - на этом же сервере тестировался GW65, в который судя по доке и сайту Novell входит служба быстрых сообщений - т.е Messenger. - но на моих "лицензионных" CD его не было, видимо входит при "правильной" покупке.
Попробую поставить на сервер с чистым NW - результат скажу.
PavelKHTW
 
Сообщения: 1037
Зарегистрирован: 08 окт 2003, 13:02
Откуда: Украина

Сообщение Иван Левшин aka Ivan L. » 22 апр 2004, 10:01

Аркадий - опять бежишь впереди паровозного дыма ;) два конфига - ессно, их и должно быть два - для собственно messaging agent и archive agent. Эт раз. Второе - если бы ты внимательнее доку читал, никаких проблем не было бы. Там по шагам все расписано - в какую кнопочку ткнуть, куда смотреть и все такое.

И эта... У нас теперь супервынь настраивается лехко, да? :lol: Вот ты меня удивил... в очередной раз...
Иван Левшин aka Ivan L.
 
Сообщения: 2576
Зарегистрирован: 05 июн 2002, 18:36
Откуда: Новомосковск, Тул. обл.

Сообщение Косинов Владимир » 23 апр 2004, 10:32

Аркадий Глазырин писал(а):
NMAA: Agent configuration failure [0xB006]
NMAA:
NMAA: Cause: Default user DN or password not specified


В strtup.aa перечислено несколько объектов. Проверь, все ли они есть в твоем дереве, правильно ли указан пароль пользователя, под которым агенты коннектятся к дереву, достаточно ли у этого пользователя прав и т.д. и т.п.
Если это не большой секрет, выкати содержимое обоих strtup.aa.
Посмотрим, сравним.
Аватара пользователя
Косинов Владимир
 
Сообщения: 166
Зарегистрирован: 07 июн 2002, 11:16
Откуда: Красноярск

Сообщение Аркадий Глазырин » 23 апр 2004, 12:46

Косинов Владимир писал(а):В strtup.aa перечислено несколько объектов. Проверь, все ли они есть в твоем дереве, правильно ли указан пароль пользователя, под которым агенты коннектятся к дереву, достаточно ли у этого пользователя прав и т.д. и т.п.
Если это не большой секрет, выкати содержимое обоих strtup.aa.
Посмотрим, сравним.


Я бы рад. Но очень многое не понятно.
Синтаксис нигде не объяснён.
При запуске ругается на дефайлтного юзера.
Выкачу. Вечером.
Аватара пользователя
Аркадий Глазырин
 
Сообщения: 2762
Зарегистрирован: 16 авг 2002, 09:09
Откуда: Екатеринбург

Извините за громоздкость. strtup.aa

Сообщение Аркадий Глазырин » 23 апр 2004, 23:13

Код: Выделить всё
;======================================================================
;                   Novell Messenger 1.0 Archive Agent
;                         Sample Startup File
;----------------------------------------------------------------------
;  Replace the values in the square brackets with your own values.
;
;  All optional switches are disabled by placing a semicolon in front
;  of the switch.  Remove the semicolon to enable the switch.
;
;  Be sure to save in ASCII format. 
;----------------------------------------------------------------------
;  This sample file is divided into two sections:
;  1) Settings only available as startup switches
;    - General
;    - NetWare Loadable Module (NLM) Specific
;  2) Settings that are recommended to be modified from the ConsoleOne
;     but are also available as startup switches.
;    - Event Logging
;    - Performance
;    - Client/Server
;    - Archive File Processing
;======================================================================

;======================================================================
;                             SECTION 1:
;             SETTINGS AVAILABLE ONLY AS STARTUP SWITCHES
;======================================================================

;----------------------------------------------------------------------
;  DN of the ArchiveAgent,
;  Example: CN=ArchiveAgent,OU=NMServer1,OU=MessengerService,O=Novell
;----------------------------------------------------------------------
/home-CN=ArchiveAgent,OU=FS1SERVER,OU=MessengerService,O=EMA

;----------------------------------------------------------------------
;  Language
;----------------------------------------------------------------------
/language-EN

;----------------------------------------------------------------------
;  User and password for agent to read settings from the directory.
;----------------------------------------------------------------------
/user-ADMIN.EMA
/password-qwerty

;====================== DIRECTORY CONFIGURATION =======================

;----------------------------------------------------------------------
; Directory Replica IP Address
; Specifies the address of the directory replica.
;----------------------------------------------------------------------
;/dirreplicaipaddr-[address]

;----------------------------------------------------------------------
; Force User Session to use Direct
; Specifies that the directory mode for user access is direct.
; This will cause LDAP profiles to be ignored.
;----------------------------------------------------------------------
/diruserforcedirect

;----------------------------------------------------------------------
; Directory User Authentication via Bind
; Specifies whether user authentication is performed via a bind or a
; comparison. Default is comparison.
;----------------------------------------------------------------------
;/diruserauthbind

;----------------------------------------------------------------------
; Directory Pool Reset Time
; Specifies the amount of time before putting a problem server back to
; the pool.
;----------------------------------------------------------------------
;/dirpoolresettime-[minutes]

;----------------------------------------------------------------------
; Directory UserID Alias
; Specifies the attribute to use instead of CN for user authentications
; and searches etc.
;----------------------------------------------------------------------
;/diruseralias-[attribute name]


;================ MESSAGE TRANSFER PROTOCOL SWITCHES ==================

;----------------------------------------------------------------------
; Disable Message Transfer Protocol for this agent
;----------------------------------------------------------------------
;/nomtp


;======================= NLM SPECIFIC SWITCHES ========================

;----------------------------------------------------------------------
;  Simple Network Management Protocol (SNMP)
;  The Messaging Agent is SNMP-enabled by default.
;----------------------------------------------------------------------
;/nosnmp

;----------------------------------------------------------------------
;  Inform Archive Agent that it is running in a cluster
;----------------------------------------------------------------------
;/cluster

;======================================================================
;                             SECTION 2:
;                    SETTINGS AVAILABLE IN ConsoleOne
;======================================================================

;====================== DIRECTORY CONFIGURATION =======================

;----------------------------------------------------------------------
; Directory Query Maximum Results
; Specifies the maximum number of results that will be returned for any
; request to the directory.
;----------------------------------------------------------------------
;/dirquerymaxresults-[number]

;----------------------------------------------------------------------
; Directory Idle Timeout
; Specifies the amount of time before an inactive directory connection
; closes down.
;----------------------------------------------------------------------
;/diridletimeout-[seconds]

;----------------------------------------------------------------------
; Directory Maximum Connections
; Specifies the maximum number of directory connections
;----------------------------------------------------------------------
;/dirmaxconnections-[number]

;----------------------------------------------------------------------
; Directory Default Connections
; Specifies the default number of directory connections
;----------------------------------------------------------------------
;/dirdefaultconnections-[number]


;=========================== LOG SWITCHES =============================

;----------------------------------------------------------------------
;  Log Level
;  Selects error logging only (Normal) or basic details (Verbose)
;  or full details (Diagnostic).
;  /loglevel-Normal | Verbose | Diagnostic ]
;----------------------------------------------------------------------
/loglevel-Normal

;----------------------------------------------------------------------
;  Disk Logging
;  Disables writing logfile to disk.
;----------------------------------------------------------------------
;/logdiskoff

;----------------------------------------------------------------------
;  Log Directory
;----------------------------------------------------------------------
/log-\\[FS1\VOL3\GW_msg.log

;----------------------------------------------------------------------
;  Maximum Logfile Age
;  Determines how long (number of days) a logfile resides on the disk
;  before being automatically deleted.
;----------------------------------------------------------------------
/logdays-3

;----------------------------------------------------------------------
;  Maximum Log Disk Space
;  Determines the maximum disk space (megabytes) used for all logfiles.
;----------------------------------------------------------------------
/logmax-2000

;===================== SSL CERTIFICATE SWITCHES =======================

;----------------------------------------------------------------------
;  Enable SSL on the C/S communication pipe
;----------------------------------------------------------------------
;/ssl-[enable | disable]

;----------------------------------------------------------------------
;  SSL Certificate
;  Valid server certificate in PEM or PFX format obtained from a
;  Certificate Authority ( CA ).
;----------------------------------------------------------------------
;/certpath-\\[server]\[volume]\[directory]
;/certfile-\\[server]\[volume]\[directory]\[certificate]
;/keyfile-\\[server]\[volume]\[directory]\[private key]
;/keypassword-[key password]

;====================== CLIENT/SERVER SWITCHES ========================

;----------------------------------------------------------------------
;  TCP Port Number
;  Specifies the port number that the Archive Agent will listen for
;  C/S requests.
;  The default port is 8310.
;  If you have multiple Archive Agent instances servicing C/S requests
;  running on the same machine, you must specify a different port for
;  each instance.
;----------------------------------------------------------------------
;port-8310

;----------------------------------------------------------------------
;  TCP IP Address
;  Specifies the IP address that the Archive Agent will listen for
;  C/S requests. The default is the first one that Archive Agent can
;  find and which are defined on the server.
;  This switch will tell the Archive Agent to listen to specific
;  address.
;----------------------------------------------------------------------
/ip-10.0.9.3

;----------------------------------------------------------------------
;  Maximum connections
;  Number of Client/Server connections the server will allow.
;  The default is 5120 (5K).
;----------------------------------------------------------------------
;/maxconns-[number]

;----------------------------------------------------------------------
;  Number of TCP Processing Threads
;  Sets how many threads the Archiving Agent spawns for handling
;  Client/Server requests. The default is 15.
;----------------------------------------------------------------------
;/threads-[number]


;================ MESSAGE TRANSFER PROTOCOL SWITCHES ==================

;----------------------------------------------------------------------
; MTP Listen Port Number
; Specifies the port number that the MTP will listen for MTP file
; transfer.
;----------------------------------------------------------------------
;/mtpport-[port number]

;----------------------------------------------------------------------
; MTP Listen IP Address
; Specifies the IP address that the agent will listen for the MTP file
; transfer.
;----------------------------------------------------------------------
;/mtpipaddr-[address]

;----------------------------------------------------------------------
;  Enable SSL for MTP
;----------------------------------------------------------------------
;/mtpssl-[enable | disable]

;----------------------------------------------------------------------
;  Queue Directory
;----------------------------------------------------------------------
/queue-\\FS1\VOL3\GW_msg.que


;================= HTTP MESSAGE PROCESSING SWITCHES ===================

;----------------------------------------------------------------------
; Enable use of http for browser queries and port number to use
; when client/server mode is used, this must use the same port number
;----------------------------------------------------------------------
;/httpport-[port number]

;----------------------------------------------------------------------
; User name for Authenticating requester of HTTP information
;----------------------------------------------------------------------
;/httpuser-[user ID]

;----------------------------------------------------------------------
; User password for Authenticating requester of HTTP information
;----------------------------------------------------------------------
;/httppassword-[password]

;----------------------------------------------------------------------
;  Enable SSL for Https
;----------------------------------------------------------------------
;/httpssl-[enable | disable]


;=================== LDAP AUTHENTICATION SWITCHES =====================

;----------------------------------------------------------------------
;  This LDAP user ID is used by Archive Agent to establish connection
;  with the LDAP server to read its configuration. The format should be
;  like this "cn=userid,ou=group,ou=division,o=organization"
;----------------------------------------------------------------------
;/ldapuser-[DN format] 

;-----------------------------------------------------------------------
;  The password for the LDAP user                                       
;-----------------------------------------------------------------------
;/ldappwd-[password]       

;-----------------------------------------------------------------------
;  The LDAP server's IP address in dotted format or DNS format.  If multiple
;  LDAP authentication servers addresses are specified, they will be used
;  by LDAP server in the FAILOVER manner. [address] should be specified
;  in this format: "123.3.4.1 123.4.5.2 123.3.4.5"  with a space in between
;  each address
;-----------------------------------------------------------------------
;/ldapipaddr-[address] 

;-----------------------------------------------------------------------
;  The port number that the LDAP server will listen on for authentication
;  default is 389. This switch is used to specify the ldap port for failover
;  mode.
;------------------------------------------------------------------------
;/ldapport-[number]     

;------------------------------------------------------------------------
;  Indicate to the Archive Agent whether this LDAP authentication is
;  using SSL for failover mode
;------------------------------------------------------------------------
;/ldapssl               

;------------------------------------------------------------------------
;  Specify the SSL Key file name e.g. gwkey.der  This switch is used for 
;  failover mode
;------------------------------------------------------------------------
;/ldapsslkey-[name]   

;========================== END OF FILE ===============================
Аватара пользователя
Аркадий Глазырин
 
Сообщения: 2762
Зарегистрирован: 16 авг 2002, 09:09
Откуда: Екатеринбург

Извините за громоздкость. strtup.ma

Сообщение Аркадий Глазырин » 23 апр 2004, 23:28

Код: Выделить всё
;======================================================================
;                   Novell Messenger 1.0 Messaging Agent
;                         Sample Startup File
;----------------------------------------------------------------------
;  Replace the values in the square brackets with your own values.
;
;  All optional switches are disabled by placing a semicolon in front
;  of the switch.  Remove the semicolon to enable the switch.
;
;  Be sure to save in ASCII format. 
;----------------------------------------------------------------------
;  This sample file is divided into two sections:
;  1) Settings only available as startup switches
;    - General
;    - NetWare Loadable Module (NLM) Specific
;  2) Settings that are recommended to be modified from the ConsoleOne
;     but are also available as startup switches.
;    - Event Logging
;    - Performance
;    - Client/Server
;======================================================================

;======================================================================
;                             SECTION 1:
;             SETTINGS AVAILABLE ONLY AS STARTUP SWITCHES
;======================================================================

;----------------------------------------------------------------------
;  DN of the Messaging Agent,
;  Example: CN=MessagingAgent,OU=NMServer1,OU=MessengerService,O=Novell
;----------------------------------------------------------------------
/home-CN=MessagingAgent,OU=FS1SERVER,OU=MessengerService,O=EMA

;----------------------------------------------------------------------
;  Language
;----------------------------------------------------------------------
/language-EN

;----------------------------------------------------------------------
;  User and password for agent to read settings from the directory.
;----------------------------------------------------------------------
/user-ADMIN.EMA
/password-qwerty

;====================== DIRECTORY CONFIGURATION =======================

;----------------------------------------------------------------------
; Directory Replica IP Address
; Specifies the address of the directory replica.
;----------------------------------------------------------------------
;/dirreplicaipaddr-[address]

;----------------------------------------------------------------------
; Force User Session to use Direct
; Specifies that the directory mode for user access is direct.
; This will cause LDAP profiles to be ignored.
;----------------------------------------------------------------------
/diruserforcedirect

;----------------------------------------------------------------------
; Directory User Authentication via Bind
; Specifies whether user authentication is performed via a bind or a
; comparison. Default is comparison.
;----------------------------------------------------------------------
;/diruserauthbind

;----------------------------------------------------------------------
; Directory Pool Reset Time
; Specifies the amount of time before putting a problem server back to
; the pool.
;----------------------------------------------------------------------
;/dirpoolresettime-[minutes]

;----------------------------------------------------------------------
; Directory UserID Alias
; Specifies the attribute to use instead of CN for user authentications
; and searches etc.
;----------------------------------------------------------------------
;/diruseralias-[attribute name]


;================ MESSAGE TRANSFER PROTOCOL SWITCHES ==================

;----------------------------------------------------------------------
; Disable Message Transfer Protocol for this agent
;----------------------------------------------------------------------
;/nomtp

;----------------------------------------------------------------------
; MTP Connect Timeout
; Specifies, in seconds, how long a connection will last before it
; is timed out.
;----------------------------------------------------------------------
;/mtpconnecttimeout-[seconds]

;----------------------------------------------------------------------
; MTP Data Timeout
; Specifies, in seconds, how long a request will wait for data before
; it is timed out.
;----------------------------------------------------------------------
;/mtpdatatimeout-[seconds]

;----------------------------------------------------------------------
; MTP Send Destination Port Number
; Specifies the port number that the MTP will bind to for the MTP file
; transfer.
;----------------------------------------------------------------------
;/mtpport-[port number]

;----------------------------------------------------------------------
; MTP Send Destination IP Address
; Specifies the IP address that the agent will bind to for the MTP file
; transfer.
;----------------------------------------------------------------------
;/mtpipaddr-[address]


;======================= NLM SPECIFIC SWITCHES ========================

;----------------------------------------------------------------------
;  Simple Network Management Protocol (SNMP)
;  The Messaging Agent is SNMP-enabled by default.
;----------------------------------------------------------------------
;/nosnmp

;----------------------------------------------------------------------
;  Inform Messaging Agent that it is running in a cluster
;----------------------------------------------------------------------
;/cluster

;======================================================================
;                             SECTION 2:
;                    SETTINGS AVAILABLE IN ConsoleOne
;======================================================================

;====================== DIRECTORY CONFIGURATION =======================

;----------------------------------------------------------------------
; Directory Query Maximum Results
; Specifies the maximum number of results that will be returned for any
; request to the directory.
;----------------------------------------------------------------------
;/dirquerymaxresults-[number]

;----------------------------------------------------------------------
; Directory Idle Timeout
; Specifies the amount of time before an inactive directory connection
; closes down.
;----------------------------------------------------------------------
;/diridletimeout-[seconds]

;----------------------------------------------------------------------
; Directory Maximum Connections
; Specifies the maximum number of directory connections
;----------------------------------------------------------------------
;/dirmaxconnections-[number]

;----------------------------------------------------------------------
; Directory Default Connections
; Specifies the default number of directory connections
;----------------------------------------------------------------------
;/dirdefaultconnections-[number]


;=========================== LOG SWITCHES =============================

;----------------------------------------------------------------------
;  Log Level
;  Selects error logging only (Normal) or basic details (Verbose)
;  or full details (Diagnostic).
;----------------------------------------------------------------------
/loglevel-Normal

;----------------------------------------------------------------------
;  Disk Logging
;  Disables writing logfile to disk.
;----------------------------------------------------------------------
;/logdiskoff

;----------------------------------------------------------------------
;  Log Directory
;----------------------------------------------------------------------
/log-\\[FS1\VOL3\GW_msg.log

;----------------------------------------------------------------------
;  Maximum Logfile Age
;  Determines how long (number of days) a logfile resides on the disk
;  before being automatically deleted.
;----------------------------------------------------------------------
/logdays-5

;----------------------------------------------------------------------
;  Maximum Log Disk Space
;  Determines the maximum disk space (megabytes) used for all logfiles.
;----------------------------------------------------------------------
/logmax-1000

;===================== SSL CERTIFICATE SWITCHES =======================

;----------------------------------------------------------------------
;  Enable SSL on the C/S communication pipe
;----------------------------------------------------------------------
;/ssl-[enable | disable]

;----------------------------------------------------------------------
;  SSL Certificate
;  Valid server certificate in PEM or PFX format obtained from a
;  Certificate Authority ( CA ).
;----------------------------------------------------------------------
;/certpath-\\[server]\[volume]\[directory]
;/certfile-\\[server]\[volume]\[directory]\[certificate]
;/keyfile-\\[server]\[volume]\[directory]\[private key]
;/keypassword-[key password]

;====================== CLIENT/SERVER SWITCHES ========================

;----------------------------------------------------------------------
;  TCP Port Number
;  Specifies the port number that the Messaging Agent will listen for
;  C/S requests.
;  The default port is 8300.
;  If you have multiple Messaging Agent instances servicing C/S
;  requests running on the same machine, you must specify a different
;  port for each instance.
;----------------------------------------------------------------------
;/port-8300

;----------------------------------------------------------------------
;  TCP IP Address
;  Specifies the IP address that the Messaging Agent will listen for
;  C/S requests. The default is the first one that Messaging Agent can
;  find and which are defined on the server.
;  This switch will tell the Messaging Agent to listen to specific
;  address.
;----------------------------------------------------------------------
/ip-10.0.9.3

;----------------------------------------------------------------------
;  Maximum connections
;  Number of Client/Server connections the server will allow.
;  The default is 5120 (5K).
;----------------------------------------------------------------------
;/maxconns-[number]

;----------------------------------------------------------------------
;  Number of TCP Processing Threads
;  Sets how many threads the Messaging Agent spawns for handling
;  Client/Server requests. The default is 15.
;----------------------------------------------------------------------
;/threads-[number]


;================ MESSAGE TRANSFER PROTOCOL SWITCHES ==================

;----------------------------------------------------------------------
;  Queue Directory
;----------------------------------------------------------------------
/queue-\\FS1\VOL3\GW_msg.que


;================= HTTP MESSAGE PROCESSING SWITCHES ===================

;----------------------------------------------------------------------
; Enable use of http for browser queries and port number to use
; when client/server mode is used, this must use the same port number
;----------------------------------------------------------------------
;/httpport-[port number]

;----------------------------------------------------------------------
; User name for Authenticating requester of HTTP information
;----------------------------------------------------------------------
;/httpuser-[user ID]

;----------------------------------------------------------------------
; User password for Authenticating requester of HTTP information
;----------------------------------------------------------------------
;/httppassword-[password]

;----------------------------------------------------------------------
;  Enable SSL for Https
;----------------------------------------------------------------------
;/httpssl-[enable | disable]


;=================== LDAP AUTHENTICATION SWITCHES =====================

;----------------------------------------------------------------------
;  This LDAP user ID is used by Messaging Agent to establish connection
;  with the LDAP server to read its configuration. The format should be
;  like this "cn=userid,ou=group,ou=division,o=organization"
;----------------------------------------------------------------------
;/ldapuser-[DN format] 

;-----------------------------------------------------------------------
;  The password for the LDAP user                                       
;-----------------------------------------------------------------------
;/ldappwd-[password]       

;-----------------------------------------------------------------------
;  The LDAP server's IP address in dotted format or DNS format.  If multiple
;  LDAP authentication servers addresses are specified, they will be used
;  by LDAP server in the FAILOVER manner. [address] should be specified
;  in this format: "123.3.4.1 123.4.5.2 123.3.4.5"  with a space in between
;  each address
;-----------------------------------------------------------------------
;/ldapipaddr-[address] 

;-----------------------------------------------------------------------
;  The port number that the LDAP server will listen on for authentication
;  default is 389. This switch is used to specify the ldap port for failover
;  mode.
;------------------------------------------------------------------------
;/ldapport-[number]     

;------------------------------------------------------------------------
;  Indicate to the Messaging Agent whether this LDAP authentication is
;  using SSL for failover mode
;------------------------------------------------------------------------
;/ldapssl               

;------------------------------------------------------------------------
;  Specify the SSL Key file name e.g. gwkey.der  This switch is used for 
;  failover mode
;------------------------------------------------------------------------
;/ldapsslkey-[name]   

;========================== END OF FILE ===============================
Аватара пользователя
Аркадий Глазырин
 
Сообщения: 2762
Зарегистрирован: 16 авг 2002, 09:09
Откуда: Екатеринбург

Re: Извините за громоздкость. strtup.ma

Сообщение Иван Левшин aka Ivan L. » 24 апр 2004, 15:26

Дык... У тя архив-агент не стартует, а не мессенджер! Или таки мессенджер-агент?

У меня ситуация была - когда наоборот. Архив-агент работал ОК :)
Иван Левшин aka Ivan L.
 
Сообщения: 2576
Зарегистрирован: 05 июн 2002, 18:36
Откуда: Новомосковск, Тул. обл.

Сообщение Косинов Владимир » 24 апр 2004, 17:33

Что сразу бросилось в глаза:
В файле strtup.aa у Аркадия есть такая строка:
/home-CN=ArchiveAgent,OU=FS1SERVER,OU=MessengerService,O=EMA
У меня она выглядит так:
/home-"CN=ArchiveAgent,OU=FS1SERVER,OU=MessengerService,O=EMA"
Аватара пользователя
Косинов Владимир
 
Сообщения: 166
Зарегистрирован: 07 июн 2002, 11:16
Откуда: Красноярск

Сообщение Косинов Владимир » 24 апр 2004, 17:38

Аркадий Глазырин писал(а):
Косинов Владимир писал(а):В strtup.aa перечислено несколько объектов. Проверь, все ли они есть в твоем дереве, правильно ли указан пароль пользователя, под которым агенты коннектятся к дереву, достаточно ли у этого пользователя прав и т.д. и т.п.
Если это не большой секрет, выкати содержимое обоих strtup.aa.
Посмотрим, сравним.


Я бы рад. Но очень многое не понятно.
Синтаксис нигде не объяснён.


Имя пользователя и пароль имель в виду эти:
/user-ADMIN.EMA
/password-qwerty
Прав этому пользователю по-видимому хватает:)
Аватара пользователя
Косинов Владимир
 
Сообщения: 166
Зарегистрирован: 07 июн 2002, 11:16
Откуда: Красноярск

Сообщение Иван Левшин aka Ivan L. » 24 апр 2004, 20:18

У меня тож безо всяких кавычек. Все работает ;)
Иван Левшин aka Ivan L.
 
Сообщения: 2576
Зарегистрирован: 05 июн 2002, 18:36
Откуда: Новомосковск, Тул. обл.

Сообщение Аркадий Глазырин » 24 апр 2004, 23:38

Косинов Владимир писал(а):Имя пользователя и пароль имель в виду эти:
/user-ADMIN.EMA
/password-qwerty
Прав этому пользователю по-видимому хватает:)


Странно. У него S на ROOT. Это ж Admin!

В документации сказано, что CN=ArchiveAgent надо давать права как у Admin.
Я ему ничего не дал. Как сделался так и оставил. Может тут проблема?
И это. В документации сказано, что GroupWise Messanger построен на eDirectory. В этом дереве eDirectory нет. Только NDS. Если честно я вообще не в курсе что такое eDirectory для NW и как его (и главное зачем) ставить.
Аватара пользователя
Аркадий Глазырин
 
Сообщения: 2762
Зарегистрирован: 16 авг 2002, 09:09
Откуда: Екатеринбург

Сообщение Иван Левшин aka Ivan L. » 25 апр 2004, 00:15

Аркадий... Для начала - какая версия DS.NLM у тебя пользуется? Поставить едир - религиозные убеждения не позволяют? ;)

И - если написано в книге, что надо дать права - значит их надо дать. Или не удивляйся, что ничего не работает :)
Иван Левшин aka Ivan L.
 
Сообщения: 2576
Зарегистрирован: 05 июн 2002, 18:36
Откуда: Новомосковск, Тул. обл.

Сообщение Аркадий Глазырин » 25 апр 2004, 00:21

Иван Левшин aka Ivan L. писал(а):Аркадий... Для начала - какая версия DS.NLM у тебя пользуется?


DS.NLM 8.82 Tree name: EMATREE
Server name: .FS1.EMA

Иван Левшин aka Ivan L. писал(а):Поставить едир - религиозные убеждения не позволяют? ;)


Нет. Не представляю где его взять и как ставить. И, самое главное, какие подводные камни меня ждут. Може рухнет всё. Или потребуется ещё какие-то подпорки ставить.
Аватара пользователя
Аркадий Глазырин
 
Сообщения: 2762
Зарегистрирован: 16 авг 2002, 09:09
Откуда: Екатеринбург

Пред.След.

Вернуться в Novell

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 54

cron